Metal Deck

 

 

STEELON (DECK PLATE SDP-51)

Properties

TYPE SDP 51	BASE STEEL THICKNESS	WEIGHT COVERED AREA	NEUTRAL AXIS	EFFECTIVE SECOND MOMENT OF AREA	EFFECTIVE COMPRESSION SECTION MODULUS	EFFECTIVE SECTION MODULUS TENSION	ULTIMATE MOMENT OF RESISTANCE
	Mm	Kg / m²	Mm	Imm⁴	Zc mmᶟ	Zt mmᶟ	KNM
SDP 51-08	0.8	8.59	18.63	332196	10392	18219	4.35
SDP 51-10	1.0	10.56	19.84	448229	14618	23178	6.12
SDP 51-12	1.2	12.54	20.87	570672	19324	28155	8.9
SDP 51-15	1.5	15.50	22.14	761702	27101	35603	11.34

BASE STEEL	CONDITION OF SPAN	OVERALL DEPTH OF DECK SLAB (mm)
		100	125	135	150	175	200
0.80 mm	SIMPLY SUPPORTED	2485	2425	2400	2295	2150	2040
	CONTINUOUS (3SPAN OR MORE)	2850	2785	2725	2620	2465	2330
1.00 mm	SIMPLY SUPPORTED	2655	2615	2600	2540	2385	2265
	CONTINUOUS (3SPAM OR MORE)	3015	2980	2965	2950	2850	2700
1.20 mm	SIMPLY SUPPORTED	2765	2735	2725	2710	2560	2435
	CONTINUOUS (3SPAM OR MORE)	3145	3105	3095	3080	3035	2890
1.50 mm	SIMPLY SUPPORTED	2905	2875	2865	2855	2740	2610
	CONTINUOUS (3SPAM OR MORE)	3305	3265	3255	3240	3225	3095

 

M METAL (RF55©)

Material Specification

RF55© is manufactured from high tensile steel (min 500MPa yield stress) with a base metal thickness (BMT) of 0.75mm, 1.0mm or 1.20mm. The galvanized coating class is Z275 (min 275g/m2) in accordance with AS1397:2001. Other base metal thickness and coating classes are also available on request, subjected to availability.

 

Table 1 RF55® Maximum un-propped span

BMT（mm）	Steel Grade（MPa）	Zinc Coating Class+	2nd Moment of Area（cm⁴/m）	X-Sectional Area（mm⁴/m）	Weight ( kg/ m² )
0.75	550	Z275	42.82	1248	10.32
1.00	550	Z275	64.57	1664	13.56
1.20	550	Z275	79.42	1997	16.32

+ A zinc coating  of total 275 g/m²  (including both sides) is sufficient for internal floors in a non-aggressive environment, but the specification may be varied depending on service conditions – EN1994-1-1 4.2(3)

Table 2 RF55® Maximum un-propped span

BMT				0.75 mm
Slab thick ness (Dcs)	110	120	130	150	175	200	250
Single Span	2500	2450	2400	2300	2200	2100	1800
Continuous	3000	2900	2800	2600	2400	2200	1850
BMT				1.00 mm
Slab thick ness (Dcs)	110	120	130	150	175	200	250
Single Span	2900	2850	2800	2700	2550	2450	2300
Continuous	3700	3600	3500	3350	3150	3000	2750
BMT				1.20 mm
Slab thick ness (Dcs)	110	120	130	150	175	200	250
Single Span	3100	3000	2950	2850	2700	2600	2450
Continuous	4050	3950	3850	3650	3500	3300	3050